当前位置:首页 > 设计方案 >

10T/D-800T/D高含油料预榨成套设备

根据油料的含油量不同预处理方法也不同,般情况下,对于含油料如菜籽、棉籽、花生先预榨,将含油量降到合理水平,然后浸出;目前主要采用螺杆榨油机预榨,螺杆榨油机分单螺杆和双螺杆两种。单螺杆榨油机行程短,压力大,榨膛温度,产量大。双螺杆榨油机由于是双行程,榨膛温度较低。对于温度没有特殊要求的通常采用单螺杆榨油机,要求低温压榨的般采用双螺杆榨油。

10-800T/D High Oil Material Prepressing Equipment
We supply different pretreatment methods for oil plants with different oil content. Generally, for high oil plants such as rapeseed, cottonseed and peanut, first prepress to the reasonable level and then extract. At present, screw oil press is used for prepressing, and it includes single screw and double screw oil press. Single screw oil press is of short stroke, high pressure, high-temperatured barrel and large capacity, while double screw oil press is of low-temperatured barrel because of double stoke. Single screw oil press is used when there is no specific requirements for temperature, and double screw oil press is used for required pressing under low temperature.

上一篇:拖链浸出器的优点和拖链浸出器经济、技术指标 下一篇:大豆预处理车间工艺以及我公司大豆预处理工艺的特点


公司地址:中国·河南省郑州高新技术开发区化工路与长椿路交叉口南200米

联系电话:086-0371-65999763 / 67894188 / 67894128 传真:086- 0371-67898098

豫ICP备11017599号-8 油脂机械|油脂设备|榨油机械|油脂浸出设备|精炼油设备